Author Topic: Turbo Wax Detailing Pads  (Read 348 times)

Juan

  • Administrator
  • Jr. Member
  • *****
  • Posts: 89
    • View Profile
    • Email
Turbo Wax Detailing Pads
« on: February 26, 2010, 08:59:07 PM »
New Generation of Foam Pads-Center Ring Foam Pads

Foam Pads for the Porter Cable We have provided the guidelines for the Standard Industry color-code useage of foam pads.
 
Yellow Foam Pad- Use for Heavy duty Compound
Orange Foam Pad- Use for Light duty compound
White Foam Pad- Use for Polish
Green Foam Pad- Use for Compound/Polish
Black Foam Pad- Use for machine Glaze
Blue Foam Pad- Use for Polish/Sealant




New innovative foam pad design that is safer and faster.  The new design is a recessed back flexible ring permanently glued on the Velcro side so the backing plate is centered on the pad every time.  You can center the plate one just one hand in seconds and the center ring prevents the backing plate from cutting threw the foam pad and making contact with the paint.  Another benefit of the center ring is that when you have a true centered pad on the polisher the final finish is even and the technician will have less fatigue in their arms.

The face of the center ring pads will have a hexagon cut design which will allow for the chemicals to be distributed better while buffing and keep the heat down as well.

What separates us from the rest is that  we don’t just lay sheets of foam with Velcro  and die cut them, we manufacture our foam pads with recessed backs to protect and eliminate any accidents a technician can do while buffing.  Flat pads are great but if you have an exposed backing plate edge you can hit the paint and cause damage that will set you back.
 
New generation of buffing pads, hexagon squares that will help trap the polishes while buffing and reduce the heat buildup when the user is buffing. The hexagon pattern on the pads also helps distribute the polish more evenly giving you a better finish, special black ring on the back of the foam pads is to center the backing plate, provide protection from the backing plate making any contact on the paint,foam pads are made from the BEST materials . Made in U.S.A.
 
Ring provides instant one hand centering
Ring prevents backing plate cut threw
Ring system is fully washable.

Our foam pads should last in between 15 - 20 uses if caring of the pads is utilized.

·Periodically clean foam pads with a nylon bristle brush to remove polish build-up.

·If build-up is heavy, rinse foam pad in a sink with water and mid soap.

·Ring out excess water and polish. Air dry and never put in dryer








« Last Edit: February 27, 2010, 05:31:05 PM by Juan »

Juan

  • Administrator
  • Jr. Member
  • *****
  • Posts: 89
    • View Profile
    • Email
Detailing with Porter Cable BMW M3
« Reply #1 on: April 01, 2010, 08:35:37 PM »
1995 BMW M3

The paint was original, the car was in storage for 3 years and the last 6 months the car was parked on the driveway, the owner wanted to put the car back on the road so it was definitely time for a good detail job for it. The right front fender told us the condition of the car, which turned out to be very poor, after I evaluated the condition of the car I got to work, I did the following steps;

Washed it and at the same time used our oxidation block
wheels were cleaned with our wheel cleaner
Dried
 I ended up using a 6 to finish it.
Our Swirl Remover with orange pad and the porter cable speed set at 6, one pass the switch to a white pad
Pre Wax by hand
Wax by hand
Total time 4 hrs

It is amazing when I see some detail Jobs how many different products some people use, especially to cut.




Condition of Front Left fender